>
Brake Switch Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the lower crash pad.
(Refer to the Body - "Crash Pad")
3.
Disconnect the stop lamp switch con ...
Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with a L wrench (A).
Tightening torque :
2.7 ~ 3.1 N.m (0.28 ~ 0.32 kgf.m, 2.0 ~ 2.3 lb-ft)
...
Memory Power Seat Unit (IMS & PSM) Repair procedures
Removal
1.
Remove the negative(-) battery terminal.
2.
Remove the seats in the car.
(Refer to Body - "Front Seat Assembly")
3.
Remove the IMS & PSM module (A) after loosening 4 screws ...