Hyundai Equus: Lumbar Support Unit Components and Components Location

Climate Seat Unit Repair procedures

Removal Front Seat - Climate control system Seat Blower 1. Disconnect the negative (-) battery terminal. 2. Remove the front seat. (Refer to Body - "Front Seat Assembly") 3. Remove the f ...

Lumbar Support Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear seat back. (Refer to Body - "Rear Seat Back Cover") 3. Remove the bladder & ECU/ valve assembly (A) after l ...

See also:

Smart cruise control vehicle to vehicle distance
To set vehicle to vehicle distance: This function allows you to program the vehicle to maintain relative distance to the vehicle ahead without depressing the accelerator pedal or brake pedal. ...

ON/OFF Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Spark Plug Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the ...