Hyundai Equus: Body Electrical System

Rear Seat Belt Buckle Repair procedures

Replacement [Sedan 6:4] 1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly") 2. Loosen the mounting bolt, and then remove the rear seat belt buckle (A). [L ...

General Information

...

See also:

Trunk Lid Back Panel Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

Warning type
The system will activate when: 1.The system is on 2.Vehicle speed is above 9.3 mph (15 km/h) 3.Other vehicles are detected in the rear side If a vehicle is detected within the boundary of the ...

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...