>
Replacement |
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
[RH]
|
3. |
Install in the reverse order of removal. |
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
[RH]
|
3. |
Install in the reverse order of removal. |
Rolling code programming
Rolling code devices which are "code-protected" and manufactured after 1996 may
be determined by the following:
Reference the device owner's manual for verification.
The handheld ...
Presure Switch Description and Operation
Description
The oil pressure switch detects any abnormal hydraulic pressure to the 35R clutch in the N range. ...
Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery.
2.
Remove the crash pad lower panel (A).
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower panel and then push the bl ...