Hyundai Equus: Head lamp leveling Device

Auto Light Sensor Repair procedures

Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto li ...

Components and Components Location

Component Location 1. Head lamp leveling unit2. Head lamp leveling actuator ...

See also:

Refrigerant label
The refrigerant label is located on the underside of the hood. The label contains the following information: Type of refrigerant Amount of refrigerant ...

If engine turns over normally but does not start
1. Check fuel level. 2. With the Engine Start/Stop Button in the OFF position, check all connectors at ignition coils and spark plugs. Reconnect any that may be disconnected or loose. 3. If the en ...

Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21, ...