Hyundai Equus: Smart Key System
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Smart Key System
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Smart Key System
- Specifications
- Components and Components Location
- Description and Operation
- Smart Key Repair procedures
- Smart Key Unit Components and Components Location
- Smart Key Unit Schematic Diagrams
- Smart Key Unit Repair procedures
- Smart Key Antenna Repair procedures
- Smart Key Receiver Components and Components Location
- Smart Key Receiver Repair procedures
- Smart Key Diagnostic Repair procedures
MTS Antenna Repair procedures
Removal
1.
Remove the roof antenna.
(Refer to Audio - "Antenna")
(Refer to AVN System - "Roof Antenna")
Installation
1.
Install the roof antenna.
(Refer to Audio - "Antenna")
(Refer to AV ...
Specifications
Specifications
Smart Key Unit
ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F ~ 167°F (-30°C ~ 75°C)LoadMax. 2.5 mA (When welcome function 3.7 mA)
...
See also:
8LR Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Summer tires
HYUNDAI specifies summer tires on some models to provide superior performance
on dry roads. Summer tire performance is substantially reduced in snow and ice.
Summer tires do not have the tire tra ...
Power Latch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk trim in the trunk.
(Refer to Body - "Trunk")
3.
Remove the power latch (A) after removing the bolts (2EA) and ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com