Hyundai Equus: Fuel Filler Door

Lumbar Support Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear seat back. (Refer to Body - "Rear Seat Back Cover") 3. Remove the bladder & ECU/ valve assembly (A) after l ...

Components and Components Location

Component Location 1. Fuel filler door open switch2. Fuel filler door release actuator ...

See also:

Repair procedures
Inspection System Parameterization Parameterization of the system has to be performed to find the amount of pulses needed to open the trunk. Due to tolerances not every car is equal. Therefore ...

Heater & A/C Control Unit Components and Components Location
Component Connector Pin Function Pin No.Connector A Function1Ground2Rheostat (Illumination -)3Rear Defog Switch4-5Detent Out (+)6HTD 7Illumination + (Tail)8-9Ground10-11Climate CAN High12 ...

Console Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the console temperature control actuator connector. 3. Verify that the console temperature control actuator operates to the defr ...