Hyundai Equus: Seat Belt Buckle Switch (BS) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and Operation
| Description |
The SRSCM monitors the status of the driver and front
passenger seat belt buckle. The SRSCM provides one pin each for the
driver and front passenger seat belt buckle status input. The seat belt
buckle circuit operates from internal boost voltage supplied by the
SRSCM, and uses chassis ground for the signal return. The buckle status
modify the SRSCM deployment. If the buckle status is unbuckled, the
corresponding pretensioner will not be deactivated.
Side Impact Sensor (SIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before disconnecting the side impact sensor conn ...
See also:
Rear Curtain Repair procedures
Inspection
Connect the battery voltage and check the rear curtain motor
rotation. If the motor does not operate properly, substitute with a
known-good rear curtain motor and check for proper op ...
Front Seat Assembly Components and Components Location
Component Location
1. Front seat assembly
...
Components and Components Location
Components (1)
1. Main crash pad assembly2. Crash pad side cover [LH]3. Crash pad side cover [RH]4. Crash pad under cover [LH]5. Crash pad lower panel
Components (2)
1. Main crash pad assem ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com