The electronic active headrest is designed to trigger the
headrest forward and upward when impact sensor detects a rear (or front)
impact.
This helps to prevent the driver's and front passenger's heads from moving backward and thus helps minimize neck injuries.
Removal
First Seat
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Remove the seat heater switch a ...
Component location
1. Active headrest connector2. Elevator system connector3. Impact sensor4. Electronic active headrest
...
See also:
Fuel Pump Repair procedures
Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
2.
Folding the rear seat cushion.
3.
Remove the fuel pump ...
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...
Spark plugs
Make sure to install new spark plugs of the correct heat range. ...