>
Electronic Active Headrest Repair procedures
Inspection
1.
How to reassemble the Headrest which was released by rear (or front) Impact.
2.
How to unlock the trigger in case of trigger is locked.
(1)
Normally, the trigger position is un ...
27 Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Multi-view Camera Switch Repair procedures
Removal
Floor Console Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Disconnect the consol ...