>

Hyundai Equus: Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Automatic Transmission Control System

Valve Body Components and Components Location
Components Location 1. Input speed sensor2. Middle speed sensor3. Output speed sensor4. E Module5. Line presure control solenoid valve6. Damper clutch control solenoid valve7. ON/OFF solenoid val ...

Description and Operation
Description Automatic transmission system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to ...

See also:

Ambient Temperature Sensor Description and Operation
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower te ...

Line Pressure Control Solenoid Vale Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air intake is controlled automatically according to certain conditions such as or position. To cancel or return the defog ...

Categories

Hyundai Equus Manuals

© 2011-2025 Copyright www.heqmanual.com