>

Hyundai Equus: 8LR Brake Control Solenoid Valve Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2020 Service ManualHyundai Equus: 8LR Brake Control Solenoid Valve Specifications

Specifications
Direct control VFS[8LR/B]
x Control Type : Normal low type
Control Pressure kpa (kgf/cmx, psi)
0 ~ 2108.42
(0 ~ 21.5, 0 ~ 305.80)
Current value(mA)
0~1100
 Internal resistance(x)
5.0~5.6

    8LR Brake Control Solenoid Valve Description and Operation
    Description 8LR Brake control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 8LR Brake. ...

    8LR Brake Control Solenoid Valve Schematic Diagrams
    Circuit Diagram ...

    See also:

    Recommended cold tire inflation pressures
    All tire pressures (including the spare) should be checked when the tires are cold. УCold TiresФ means the vehicle has not been driven for at least three hours or driven less than one mile (1.6 km ...

    Input Speed Sensor Repair procedures
    Inspection 1. Check signal waveform of Input speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

    Components and Components Location
    Components 1. Steering Gear Box2. EHPS Motor ...

    Categories

    Hyundai Equus Manuals

    © 2011-2020 Copyright www.heqmanual.com