Hyundai Equus: Starting System

Battery Sensor Repair procedures

Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolts (B). Installation ...

Description and Operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

See also:

Tilt Steering/Telescope Steering
Adjust the steering wheel angle (2) and position (3) with the knob (1) on the steering column. Move the steering wheel, so it points toward your chest, not toward your face. Make sure you can ...

Specifications
Specifications Purge Control Solenoid Valve (PCSV) x Specification ItemSpecificationCoil Resistance (x)14.0 ~ 18.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) x Type: Piezo-Resistive ...

4&OD Clutch Control Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...