Hyundai Equus: Cooling System

Cylinder Block Repair procedures

Disassembly Engine removal is required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors ca ...

Coolant Repair procedures

Engine Coolant Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from ...

See also:

Windows
(1) Driver’s Door Power Window Switch (2) Front Passenger’s Door Power Window Switch (3) Rear Door (left) Power Window Switch and Curtain Switch (if equipped) (4) Rear Door (right) Power Window S ...

Trailing Arm Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage t ...

Presure Switch Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...