Hyundai Equus: Mirrors
- Interior rearview mirrors
- Automatic-dimming function
- Compass function
- Programming HomeLink®
- Programming
- Gate operator & Canadian programming
- Operating HomeLink®
- Reprogramming a single HomeLink® button
- Erasing HomeLink® buttons
- This device complies with Part 15 of the FCC Rules.
- Automatic-dimming function
- Compass function
- Standard programming
- Rolling code programming
- Gate operator & Canadian programming
- Operating HomeLink®
- Reprogramming a single HomeLink® button
- Erasing HomeLink® buttons
- This device complies with Part 15 of the FCC Rules.
- Outside rearview mirror
- Reverse Parking Aid Function
Horn
To sound the horn, press the area indicated by the horn symbol on your steering
wheel (see illustration). The horn will operate only when this area is pressed.
CAUTION
Do not strike the horn s ...
Interior rearview mirrors
Before you start driving, adjust the rearview mirror to center on the view through
the rear window.
WARNING
Make sure your line of sight is not obstructed. Do not place objects in the
rear seat, ...
See also:
Side Impact Sensor (SIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before disconnecting the side impact sensor connecto ...
DRIVE mode / SNOW mode
The drive mode may be selected according to the driver’s preference or road condition.
The system initializes to the NORMAL mode when the Engine Start/Stop Button is
turned off and on.
It is d ...
Yaw-rate and Lateral G Sensor Repair procedures
Replacement
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable
2.
Remove the floor console.
(Refer to Body - "Console")
3.
Disconnect the yaw rate & lateral G s ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com