Hyundai Equus: Operating HomeLink®
Second generation VI (2009–2025) / Hyundai Equus 2009-2025 Owners Manual / Features of your vehicle / Mirrors / Operating HomeLink®
To operate, simply press and release the programmed HomeLink® button. Activation will now occur for the trained device (i.e. garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.). For convenience, the hand-held transmitter of the device may also be used at any time.
Gate operator & Canadian programming
During programming, your handheld transmitter may automatically stop transmitting.
Continue to press the Integrated HomeLink® Wireless Control System button (note
steps 2 through 3 in the Program ...
Reprogramming a single HomeLink® button
To program a device to HomeLink® using a HomeLink® button previously trained,
follow these steps:
1. Press and hold the desired HomeLink® button. DO NOT release the button.
2. The indicator lig ...
See also:
Cool and Warm Box Repair procedures
Replacement
1.
Remove the rear seat cushion and seat back assembly.
(Refer to Body - "Rear Seat Assembly")
2.
Remove the tower console assembly (A).
3.
Remove the rear console armrest (A ...
Troubleshooting
Troubleshooting
1.
After replacing multi-view camera unit, always check that the system operates properly.
2.
If the failure persists after replacing the multi-view camer ...
Emergency Fastening Device (EFD) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
3. ...
Categories
Hyundai Equus Manuals
