Hyundai Equus: Cooling System

Cylinder Block Repair procedures

Disassembly Engine removal is required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connector ...

Coolant Repair procedures

Engine Coolant Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from ...

See also:

Rheostat Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lower crash panel and then disconnect the rheostat connector. 3. Check for intensity of new rheostat switch. If th ...

Front Door Trim Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

Thermostat Repair procedures
Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 4.0~6.0N.m (0.4~0.6kgf.m, 3.0~4.4lb-ft) 2. Remove the air duct, air intak hose and ...