>
Hyundai Equus: Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above 9.3 mph (15 km/h)
3.Other vehicles are detected in the rear side

If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outside rearview mirror and the head up display.
If the detected vehicle is not in warning range, the warning will turn off according to driving conditions.

The second stage alarm will activate when:
1.The first stage alert is on
2.The turn signal is on to change a lane
When the second stage alert is activated, a warning light will blink on the outside rearview mirror, the head up display and a alarm will sound.
If you move the turn signal switch to the original position, the second stage alert will be deactivated.
Operating conditions
Detecting sensor8LR Brake Control Solenoid Valve Description and Operation
Description
8LR Brake control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the 8LR Brake. ...
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Power Door Mirror Actuator Repair procedures
Inspection
1.
Remove the front door quadrant inner cover. Take care not to damage fixing clips.
(Refer to Body - "Front Door")
2.
Disconnect the power door mirror connector from the harness. ...