>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing (A). (Refer to the Body group - "Crash pad") |
3. |
Disconnect the glove box housing connector (A). |
4. |
Remove the DIS head unit. (Refer to DIS system) |
5. |
Remove the USB interface unit. |
6. |
Remove the front/rear parking assist system unit. (Refer to Front/Rear Parking assist system) |
7. |
Remove the AFLS unit(A) after removing connector and nuts(2EA). |
Installation |
1. |
Install the AFLS unit after connecting the connector. |
2. |
Install the front/rear parking assist system unit. |
3. |
Install the USB interface unit. |
4. |
Install the DIS head unit. |
5. |
Install the glove box housing. |
6. |
Connect the negative (-) battery terminal. |
Stabilizer Bar Repair procedures
Removal
[Front Stabilizer Bar]
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the stabilizer link (A) ...
Dimensions
...
Advanced vehicle safety management (AVSM) (If equipped)
AVSM detects the distance from the vehicle ahead with the sensor, to warn you
before collision and protect you in certain hazardous situations by using warning
message, warning sound and seat belt ...