Hyundai Equus: Fuel Filler Door

Lumbar Support Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear seat back. (Refer to Body - "Rear Seat Back Cover") 3. Remove the bladder & ECU/ valve assembly (A) after l ...

Components and Components Location

Component Location 1. Fuel filler door open switch2. Fuel filler door release actuator ...

See also:

Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to "Specification" Removal 1. Turn the ignition swit ...

Thermostat Repair procedures
Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 4.0~6.0N.m (0.4~0.6kgf.m, 3.0~4.4lb-ft) 2. Remove the air duct, air intak hose and ...

Specifications
Specification ItemsInner sideOuter sideRear driveshaftJoint typeCross grove(VL)Cross grove(VL)Max. permissible angle21°21°DifferentialOil typeHypoid gear oil MS 517-15 GT(SAE 75W/90, API GL-5, SH ...