Hyundai Equus: Spliter Unit Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Premium AVN System / Spliter Unit Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Premium AVN System / Spliter Unit Description and Operation
| Description |
The spliter unit receive the LVDS signal from AVN head unit and send it to left/right rear monitor.
(LVDS : Low Voltage Differential Signaling )
Spliter Unit Components and Components Location
Components
...
Spliter Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console.
(Refer to Body - "Floor Console Assembly")
3.
Remove the spliter unit (A) after disconnecting the con ...
See also:
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...
Fuel Pressure Control Valve Schematic Diagrams
Circuit Diagram
...
Telemetics Unit (TMU) Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front AVN monitor.
(Refer to "Premium AVN System")
3.
Remove the MTS unit after loosening the screw and nuts.
4.
...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com