Hyundai Equus: Rear Seat Back Cover Components and Components Location

Rear Seat Assembly Repair procedures

Replacement [Rear Seat Cushion Assembly] 1. Pull it up and remove the rear seat cushion assembly (A). 2. Install in the reverse order of removal.     • Make sure the ...

Rear Seat Back Cover Repair procedures

Replacement [LH]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and ...

See also:

SRS Control Module (SRSCM) Repair procedures
Removal 1. Turn the engine OFF. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console assembly. (Refer to Body - ...

Hood Latch Release Handle Repair procedures
Replacement 1. After loosening the mounting screw, then remove the hood latch release handle (A). 2. Installation is the reverse of removal.     • Make sure the hood la ...

Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tightening torque : 2.7 ~ 3.1 N.m (0.28 ~ 0.32 kgf.m, 2.0 ~ 2.3 lb-ft) ...