>

Hyundai Equus: Hood Latch Release Handle Repair procedures - Hood - Body (Interior and Exterior) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Hood Latch Release Handle Repair procedures

Replacement
1.
After loosening the mounting screw, then remove the hood latch release handle (A).

2.
Installation is the reverse of removal.
   
•
Make sure the hood latch cable is connected properly.
•
Make sure the hood locks/unlocks and opens/closes properly.
    Hood Latch Release Handle Components and Components Location
    Component Location 1. Hood latch release handle ...

    Hood Latch Components and Components Location
    Component Location 1. Hood latch assembly ...

    See also:

    Description and Operation
    Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filt ...

    Components and Components Location
    Component Location 1. Start Stop Button(SSB)2. FOB key3. Trunk open switch4. RF receiver5. Interior antenna 16. Interior antenna 27. Interior antenna 38. Trunk antenna9. Door handle & do ...

    Consumer information
    This consumer information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. Your EQUUS dealer ...

    Categories

    Hyundai Equus Manuals

    © 2011-2025 Copyright www.heqmanual.com