Hyundai Equus: Hood Latch Components and Components Location

Hood Latch Release Handle Repair procedures

Replacement 1. After loosening the mounting screw, then remove the hood latch release handle (A). 2. Installation is the reverse of removal.     • Make sure the hood la ...

Hood Latch Repair procedures

Replacement 1. Remove the hood latch cover (A) mounting clip. (Refer to Engine Mechanical System - "Active Air Flap(AAF)") 2. Loosen the hood latch (B) mounting bolts. Tightening torque : ...

See also:

Alternator Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the engine cover. 3. Remove the air cleaner assembly. (1) Remove the air duct (A). (2) D ...

Removable towing hook (if equipped)
1.Open the trunk, and remove the towing hook from the tool case. 2.Remove the hole cover by pressing the lower part of the cover on the front or rear bumper. 3.Install the towing hook by turning ...

Engine Mounting Components and Components Location
Components 1. Engine mounting insulator2. Engine support bracket LH3. Engine support bracket RH4. Transmission mounting insulator ...