>
Hyundai Equus: Specifications
| Specifications |
| Items | Specification | |
| Hood | Type | Rear hinged, gas lifter type |
| Front Door | Construction | Front hinged, full door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Rear Door | Construction | Front hinged, full door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Trunk Lid | Type | Front hinged, power trunk lid type (option ) |
| Seat Belts | Front | 3 point type with Emergency Locking Retractor (E.L.R) |
| Rear | 3 point type with Emergency Locking Retractor (E.L.R) | |
| Tightening Torque |
| Items | N.m | Kgf.m | lb-ft | |
| Front and rear doors | Door hinge to body | 37.3 ~ 41.2 | 3.8 ~ 4.2 | 27.5 ~ 30.4 |
| Door hinge to door | 9.8 ~ 19.6 | 1.0 ~ 2.0 | 7.2 ~ 14.5 | |
| Door checker to door | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door checker to body | 16.7 ~ 21.6 | 1.7 ~ 2.2 | 12.3 ~ 15.9 | |
| Outside handle base mounting bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door latch mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door module mounting bolts | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Door glass mounting bolt | 8.8 ~ 11.8 | 0.9 ~ 1.2 | 6.5 ~ 8.7 | |
| Trunk Lid | Trunk lid striker mounting bolts | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 |
| Trunk lid latch mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Trunk lid key holder mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Hood | Hood hinge to body | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 |
| Hood hinge to hood | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 | |
| Hood latch to body | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Seat | Front seat mounting bolts | 34.3 ~ 53.9 | 3.5 ~ 5.5 | 25.3 ~ 39.8 |
| Front seat mounting nuts | 23.5 ~ 35.3 | 2.4 ~ 3.6 | 17.4 ~ 26.0 | |
| Rear seat back mounting bolts | 16.7 ~ 25.5 | 1.7 ~ 2.6 | 12.3 ~ 18.8 | |
| Rear seat frame mounting bolts | 16.7 ~ 25.5 | 1.7 ~ 2.6 | 12.3 ~ 18.8 | |
| Rear seat frame mounting nuts | 12.7 ~ 18.6 | 1.3 ~ 1.9 | 9.4 ~ 13.7 | |
| Seat belt | Height adjuster mounting bolts | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 |
| Front seat belt upper anchor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Front seat belt lower anchor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Front seat belt pretensioner mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear seat belt lower anchor mounting bolts | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear center seat belt retractor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear seat belt retractor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Seat belt buckle mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Outside rearview mirror | Outside rearview mirror mounting nuts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
| Wiper arm | Wiper arm mounting nuts | 22.6 ~ 31.4 | 2.3 ~ 2.7 | 16.6 ~ 19.5 |
| Sunroof | Sunroof mounting nuts | 3.9 ~ 5.9 | 0.4 ~ 0.6 | 2.9 ~ 4.3 |
| Sunroof mounting bolts | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
Special Service ToolsHazard Lamp Switch Repair procedures
Inspection
1.
Check "IPM" input/output specification of hazard lamp switch
using the GDS. If the specification is abnormal, replace the hazard
switch module.
2.
Select option "Input/output ...
Fuel Tank Repair procedures
Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
2.
Turn the ignition switch OFF and disconnect the negative ...
Speakers Repair procedures
Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
speaker mounting screws are removed and the wiring connector ...