>

Hyundai Equus: Trailing Arm Repair procedures - Air Suspension System - Suspension System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Trailing Arm Repair procedures

Removal
1.
Remove the rear wheel & tire.

Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)

2.
Disconnect the trailing arm (A) from the rear axle by loosening the bolt & nut.

Tightening torque :
100.0 ~ 120.0 N.m(10.0 ~ 12.0 kgf.m, 72.0 ~ 87.0 lb-ft)

3.
Disconnect the trailing arm (A) from the rear axle by loosening the bolt & nut.

Tightening torque :
100.0 ~ 120.0 N.m(10.0 ~ 12.0 kgf.m, 72.0 ~ 87.0 lb-ft)

4.
Installation is the reverse of removal.
    Upper Arm Repair procedures
    Removal [Front Upper arm] 1. Removal the front wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Removal the air strut assembly. (Refer ...

    Tires/Wheels
    ...

    See also:

    General Information
    General 1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is no elongation, twisting or bending. 3. ...

    Crankshaft Position Sensor (CKPS) Schematic Diagrams
    Circuit Diagram ...

    Windows
    (1) Driver’s Door Power Window Switch (2) Front Passenger’s Door Power Window Switch (3) Rear Door (left) Power Window Switch and Curtain Switch (if equipped) (4) Rear Door (right) Power Wind ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com