Hyundai Equus: Camshaft Position Sensor (CMPS) Schematic Diagrams

Camshaft Position Sensor (CMPS) Troubleshooting

Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. ...

Camshaft Position Sensor (CMPS) Repair procedures

Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Formâ€� Removal     • DON’T remove the camshaft pos ...

See also:

Blind Spot Detection Unit Repair procedures
Removal Blind spot detection (BSD) unit 1. Disconnect the negative (-) battery.     Be careful when removing the blind spot detection unit. The bracket may break off from the b ...

Mechanical Key
If the Smart Key does not operate normally, you can lock or unlock the door by using the mechanical key. Mechanical Key of Conventional Smart Key Depress and hold the release button (1) and re ...

Spliter Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console. (Refer to Body - "Floor Console Assembly") 3. Remove the spliter unit (A) after disconnecting the con ...