The Air Quality Sensor (AQS) is located at the center support
in front of the engine radiator. It detects hazardous elements in
ambient air providing output signal to the control.
AQS will detect sulfurous acid gas, carbon dioxide, carbon monoxide, hydrocarbon and allergen.
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect ambient temperature sensor.
4.
Check the resistance of the ...
Inspection
1.
Turn the ignition switch OFF.
2.
Connect the GDS.
3.
Check the output voltage of AQS between terminal 2 and 3.
1. DC 12V( Ignition)2. Sensor ground3. AQS signal
Specif ...
See also:
Trunk Lid Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Spliter Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console.
(Refer to Body - "Floor Console Assembly")
3.
Remove the spliter unit (A) after disconnecting the con ...
Schematic Diagrams
Schematic Diagram
...