Hyundai Equus: Parking Assist Sensor Schematic Diagrams

Front / Rear Parking Assist System Control Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the BCM unit. (Refer to Body Control Module - "Body Control Module") Installation 1. Install the BCM unit. 2. Conne ...

Parking Assist Sensor Repair procedures

Removal [Front Bumper] 1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector from the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Pull out the se ...

See also:

Detecting sensor
The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. ...

Line Pressure Control Solenoid Vale Description and Operation
Description Line presure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line presure . ...

Power Seat Motor Repair procedures
Inspection Slide Motor Limit Switch 1. Disconnect the limit switch (A) and operate the limit switch. 2. Check for continuity between the terminals. 3. Make sure that the seat operation is ...