>
Inspection |
1. |
It will be able to diagnose defects of DDM/ADM with GDS
quickly. GDS can operates actuator forcefully, input/output value
monitoring and self diagnosis. |
2. |
Select model and "IPM". |
3. |
Select the "DDM (Power window main)" to check. |
4. |
Select "Input/output monitoring", if you will check current
data of power door lock system. It provides input/output status of
DDM/ADM. |
5. |
If you will check the power door lock operation forcefully, select "Actuation test". |
6. |
To check the DTC of the DDM/AMD module, select "Diagnostic trouble codes" |
Smart key precautions
The smart key will not work if any of the following occur:
- The smart key is close to a radio transmitter such as a radio station or an
airport which can interfere with normal operation of th ...
Radiator Repair procedures
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, then install it to pressure tester.
2.
Apply a pressure of 93 ~ 123kPa (0.95 ~ 1.25kgf/cmx, 14 ~ ...
Rear Driveshaft (VL-VL TYPE) Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Be carefu ...