Hyundai Equus: Components and Components Location

Windshield Wiper/Washer

...

Windshield Wiper-Washer Switch Repair procedures

Removal 1. Remove the steering column upper and lower shrouds after loosening screws. 2. Disconnect the multifunction switch connector (A). 3. Remove the wiper & washer switch (A) by p ...

See also:

Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to ...

8LR Brake Control Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Room Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens and reflector (A) from the room lamp with a flat-tip screwdriver. 3. Remove the room lamp (A) after removin ...