>

Hyundai Equus: Warning message - Blind spot detection system (BSD) (If equipped) - Driving your vehicle - Hyundai Equus 2009-2026 Owners ManualHyundai Equus: Warning message

If the detecting sensor performance is low or overheated by foreign substances


If the detecting sensor performance is low or overheated by foreign substances on the rear bumper, the message will appear to notify the driver.

Also, the message may appear when there is heavy rain or in a large area with nothing to detect. In this time, check the rear bumper. If the system does not activate normally after removing the substances on the rear bumper, consult an authorized EQUUS dealer.

If there is a problem with BSD, the message will appear to notify the driver.


If there is a problem with BSD, the message will appear to notify the driver. In this time, have a vehicle checked by an authorized EQUUS dealer.

    Detecting sensor
    The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. ...

    Rear cross traffic alert
    When your vehicle moves backwards from a parking position, the sensor detects approaching vehicles to the left or right side direction and gives information to the driver. Operating condition ...

    See also:

    Power Seat Motor Repair procedures
    Inspection Slide Motor Limit Switch 1. Disconnect the limit switch (A) and operate the limit switch. 2. Check for continuity between the terminals. 3. Make sure that the seat operation is ...

    ESP Control Unit Components and Components Location
    Components [Standard] 1. Front-right tube2. Rear-left tube3. Rear-right tube4. Front-left tube5. MC26. MC17. ESP control module connector8. ESP control module(HECU)9. ESP HECU bracket [Premiu ...

    Front Door Trim Components and Components Location
    Component Location 1. Front door trim ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com