Hyundai Equus: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description and Operation

27 Brake Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Specifications Direct control VFS[UD/C] x Control type : Normal low type Control Pressure kpa (kgf/cmx, psi)0~1569.06 (0~16,0~227.57)Current value(mA)0~1100 Internal resistance ...

See also:

Repair procedures
Adjustment Glass Adjustment     • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove the rear door trim. (Refer to Re ...

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert ...

B Pillar Garnish Repair procedures
Replacement [B Pillar upper garnish]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with pr ...