Hyundai Equus: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
| Specifications |
Direct control VFS[UD/C]
x Control type : Normal low type
| Control Pressure kpa (kgf/cmx, psi) | 0~1569.06 (0~16,0~227.57) |
| Current value(mA) | 0~1100 |
| Internal resistance(x) | 5.0~5.6 |
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description and Operation
Description
UD Clutch control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the UD Clutch. ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Schematic Diagrams
Circuit Diagram
...
See also:
Parking assist system
The parking assist system assists the driver during movement of the vehicle by
chiming if any object is sensed within the distance of 39 in (100 cm) in front or
47 in (120 cm) behind the vehicle ...
Line Pressure Control Solenoid Vale Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
TPMS Receiver Description and Operation
Description
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state.
B.
In this state, there is no Auto-Lo ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com