>

Hyundai Equus: Side Impact Sensor (SIS) Components and Components Location - SRSCM - Restraint - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Side Impact Sensor (SIS) Components and Components Location

Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Components and Components Location

Components

    Side Impact Sensor (SIS) Description and Operation
    Description The Side Impact Sensor (SIS) system consists of two kinds of side impact sensor which are installed at each center of the front door module (left and right) and two rear sensors whi ...

    Side Impact Sensor (SIS) Repair procedures
    Removal     • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor conn ...

    See also:

    Brake Line Repair procedures
    Removal 1. Remove the wheel & tire. 2. Remove the brake hose clip (A). Front Rear 3. Disconnect the brake tube by loosening the tube flare nut. Tightening torque : 12.7 ~ 16.7 N ...

    Main Crash Pad Assembly Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

    Battery recharging by vehicle
    After a jump start from a good battery, run the engine for 20-30 minutes at idle or driving the vehicle before it is shutoff. Vehicle may not restart if you shut it off before the battery had chan ...

    Categories

    Hyundai Equus Manuals

    © 2011-2025 Copyright www.heqmanual.com