>

Hyundai Equus: Seat Belt Pretensioner (BPT) Components and Components Location - Seat Belt Pretensioner - Restraint - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Seat Belt Pretensioner (BPT) Components and Components Location

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Restraint / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Components and Components Location

Components

    Seat Belt Pretensioner (BPT) Description and Operation
    Description The Seat Belt Pretensioners (BPT) are installed inside center pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps ...

    Seat Belt Pretensioner (BPT) Repair procedures
    Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the safety belt (A) by turning it in the direction of arrow using a flat ...

    See also:

    Solenoid Valve Description and Operation
    Description Four air spring solenoid valves (‘-’ control) and one ambient solenoid valve are embedded inside this solenoid valve block as shown in the circuit diagram below. When connecting ...

    Components and Components Location
    Components (1) 1. Main crash pad assembly2. Crash pad side cover [LH]3. Crash pad side cover [RH]4. Crash pad under cover [LH]5. Crash pad lower panel Components (2) 1. Main crash pad assem ...

    27 Brake Control Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com