Hyundai Equus: Power Trunk Module Drive Unit Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Power Trunk Module / Power Trunk Module Drive Unit Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Power Trunk Module / Power Trunk Module Drive Unit Components and Components Location
| Component Location |
| 1. Gear motor 2. Drive bracket 3. Push rod | 4. Gear 5. Drive arm 6. Power trunk module control unit 7. Push rod pin |
Troubleshooting
Troubleshooting
Diagnosis And Testing - Power Trunk Lid System
The power trunk lid system is a complex system containing
many components. In order to perform conclusive testing, or receive
out ...
Power Trunk Module Drive Unit Schematic Diagrams
Circuit Diagram
...
See also:
Repair procedures
Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration, and replace them if necessary.
1.
Remove the rear door trim.
(Refer to Re ...
A/C Pressure Transducer Repair procedures
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”.
2.
Inspect the voltage value whether it is sufficient to be regular v ...
Muffler Repair procedures
Removal
1.
Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side.
2.
Remove the front muffler (A) on LH and RH side.
Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m ...
Categories
Hyundai Equus Manuals
2011-2026 Copyright www.heqmanual.com