Hyundai Equus: Oil Filter Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Oil Filter Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Oil Filter Repair procedures
| Replacement |
| 1. |
Draining ATF totally. |
| 2. |
Remove the oil pan (A).
|
| 3. |
Must be replaced by new oil pan.
|
| 4. |
Adding automatic transmission fluid.
(Refer to "automatic transmission system" in this group.) |
Fluid Repair procedures
Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during
scheduled services. If an oil leak is found, perform the oil level chec ...
Valve Body Description and Operation
Description
The valve body is essential to automatic transmission control
and consists of various valves used to control the oil feed from the
oil pump. Specifically, these valves consist of pr ...
See also:
Description and Operation
Description
Burglar Alarm State [B/A State]
B/A StateDescriptionDISARM
1.
In "DISARM" state, no vehicle start inhibition. So, when
door, hood, or Tailgate is opened, there is no alarm sound ...
Interior light
CAUTION
Do not use the interior lights for extended periods when the engine is not
running. It may cause battery discharge.
WARNING
Do not use the interior lights when driving in the dark. Accide ...
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com