>

Hyundai Equus: Heated Oxygen Sensor (HO2S) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Heated Oxygen Sensor (HO2S) Specifications

Specification
A/F Ratio (x)
Output Voltage(V)
RICH
0.6 ~ 1.0
LEAN
0 ~ 0.4

Item
Specification
Heater Resistance (x)
Approx. 9.0 [21°C(69.8°F)]

    Heated Oxygen Sensor (HO2S) Description and Operation
    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in ...

    Heated Oxygen Sensor (HO2S) Troubleshooting
    Signal Waveform Fig.1) The signal waveforms of front HO2S(the upper) and heater(the lower) at idle Fig.2) The signal waveforms of rear HO2S(the upper) and heater(the lower) at idle Fig.3) Typical ...

    See also:

    Power Steering Motor Components and Components Location
    Components 1. Oil reservoir2. Gear pump3. Motor4. ECU ...

    Rear Left Door Module (RLDM) Description and Operation
    Description 1. Rear Left Power Window Switch (1) Main features ItemExplanationInstallation location Rear Left Door TrimComponent configuration 1. Embedded with LIN Communication IC 2. ...

    Heater Unit Repair procedures
    Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/recycling/charging station. 3. When the engine is cool, drain the engine coolant fro ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com