>

Hyundai Equus: Fuel Pressure Control Valve Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Fuel Pressure Control Valve Specifications

Specification
Item
Specification
Coil Resistance (x)
0.47 ~ 0.51 [20°C(68°F)]

    Fuel Pressure Control Valve Description and Operation
    Description Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on vario ...

    Fuel Pressure Control Valve Troubleshooting
    Signal Waveform ...

    See also:

    Rear Remote Controller (RRC) Repair procedures
    Removal Rear Keyboard Unit 1. Remove the rear seat armrest upper cover. (Refer to Seat Electrical System - "Seat Heater Switch") 2. Disconnect the connectors (A) from armrest upper cover. ...

    27 Brake Control Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Front Seat Belt Pretensioner Repair procedures
    Replacement     • When installing the belt, make sure not to damage the pretensioner. 1. Remove the safety belt (A) by turning it in the direction of arrow using a flat- ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com