Hyundai Equus: Front Impact Sensor (FIS) Components and Components Location

Front Impact Sensor (FIS) Description and Operation

Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Front Impact Sensor (FIS) Repair procedures

Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connec ...

See also:

Lower Arm Repair procedures
Removal [Front Lower Arm] Replacement the lateral arm 1. Removal the front wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect ...

Rear combination lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the nuts holding the rear combination lamp (outside) then disconnect the connector (A). 3. Remove the rear combination la ...

Symbols used in this manual
Warnings, cautions and Notices WARNING A WARNING indicates a situation in which harm, serious bodily injury or death could result if the warning is ignored. CAUTION A CAUTION indicates a situat ...