>
Hyundai Equus Manuals

Hyundai Equus: Front Stabilizer Bar Repair procedures - Front Suspension System - Suspension System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Front Stabilizer Bar Repair procedures

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Suspension System / Front Suspension System / Front Stabilizer Bar Repair procedures

Replacement
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the stabilizer link (A) from the front strut assembly by loosening the nut.
Tightening torque :
100.0 ~ 120.0 N.m(10.0 ~ 12.0 kgf.m, 72.0 ~ 87.0 lb-ft)

3.
Disconnect the stabilizer bar (A) from the front sub frame by loosening the bolt.
Tightening torque :
50.0 ~ 65.0 N.m(5.0 ~ 6.5 kgf.m, 36.0 ~ 47.0 lb-ft)

4.
Installation is the reverse of removal.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the ball joint for rotating torque.
    Front Lower Arm Repair procedures
    Removal Remove the lateral arm. 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • ...

    Rear Suspension System
    ...

    See also:

    SRS Control Module (SRSCM) Description and Operation
    Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does ...

    Compressor Components and Components Location
    Components 1. Center Bolt2. Hub Bolt3. Hub Assembly4. Snap Ring5. Pulley6. Compressor Assembly ...

    Front Air Strut Assembly Description and Operation
    Description The air spring & damper is one unit so that it is not possible to make separation. The average pressure of front air spring is around 7.5 bar. When the front air spring is delive ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com