Hyundai Equus: Brake Line Components and Components Location

Master Cylinder Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the cover. 3. Disconnect the ECM connector (A) and TCM connector (B). And then take the protect ...

Brake Line Repair procedures

Removal 1. Remove the wheel & tire. 2. Remove the brake hose clip (A). Front Rear 3. Disconnect the brake tube by loosening the tube flare nut. Tightening torque : 12.7 ~ 16.7 N ...

See also:

Lane departure warning system (LDWS) (If equipped)
This system detects the lane with the sensor at the front windshield and warns you when your vehicle leaves the lane. WARNING The LDWS does not make the vehicle change lanes. It is the driver ...

Schematic Diagrams
Circuit Diagram NO.Function1BAT.2IGN3CAN_High4CAN_Low5GND6- ...

8LR Brake Control Solenoid Valve Description and Operation
Description 8LR Brake control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 8LR Brake. ...