Hyundai Equus: Seat Belt Buckle Switch (BS) Components and Components Location

Seat Belt Buckle Switch (BS) Description and Operation

Description The SRSCM monitors the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. T ...

Seat Belt Buckle Switch (BS) Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 3. ...

See also:

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...

Cluster Ion Generator Repair procedures
Inspection 1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. DisplayFail description00Normal51Cluster ion generator fault * For diagnostic procedur ...

Sliding the Sunroof
The Engine Start/Stop Button must be in the ON position before you can open or close the sunroof. Pressing the sunroof control lever backward or forward momentarily to the second detent posit ...