>
Hyundai Equus: Telemetics Unit (TMU) Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the front AVN monitor.
(Refer to "Premium AVN System") |
| 3. |
Remove the MTS unit after loosening the screw and nuts.
|
| 4. |
Disconnect the cables and connectors from the MTS unit. |
| Installation |
| 1. |
Install the MTS unit after connecting the cables and connectors. |
| 2. |
Install the front AVN monitor. |
| 3. |
Connect the negative (-) battery terminal. |
Telemetics Unit (TMU) Components and Components Location
BlueLink Control Switch Components and Components LocationExhaust pipe and muffler
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration,
or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten
connections or replace part ...
Repair procedures
Replacement
•
Be careful not to damage the fender and body.
•
When removing the clips, use a clip remover.
1.
Loosen the front wheel ...
Heater Control Unit Components and Components Location
Control Panel
Component
Connector Pin Function
Pin No.Connector AConnector B1GroundIgnition 22-FET (Gate)3Mode Control Actuator (Vent)FET (Drain Feedback)4Mode Control Actuator (Defrost)Sen ...