>

Hyundai Equus: Shift Lever Components and Components Location - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Shift Lever Components and Components Location

Components

1. Shift lever knob
2. Shift lever boots
3. Shift lever assembly
4. Shift cable

    Inhibitor Switch Repair procedures
    Inspection     • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Power Circuit Inspection ...

    Shift Lever Repair procedures
    Removal 1. Remove the center console. (Refer to Body - " Floor Consol") 2. Disconnect the sports mode connector (A). 3. Remove the shift cable assembly (A) from the shift lever assembl ...

    See also:

    Pre-safe seat belt (PSB) (if equipped)
    The purpose of the pre-safe seat belt is to tighten the seat belt during emergency braking, or when a loss of control is sensed. CAUTION The pre-safe seat belt activates only when the passenge ...

    Driving in flooded areas
    Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perfo ...

    Daytime running light
    Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, and it is especially helpful af ...

    Categories

    Hyundai Equus Manuals

    © 2011-2025 Copyright www.heqmanual.com