>
Circuit Diagram |
Auto hold
The AUTO HOLD feature keeps the brakes applied after the vehicle comes to a complete
stop when the shift lever is in D, R, or N. The brakes release when throttle is
applied.
Set up
1.Pre ...
Troubleshooting
Troubleshooting
SymptomSuspect areaEngine will not start or stuggle to startVapor hose damaged or disconnectedEngine stuggle to startMalfunction of the Purge Control Solenoid ValveRough idle or e ...
Repair procedures
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accordance with the procedure for that DTC. (Refer to
DTC guide)
...