Hyundai Equus: Interior light bulb replacement
Second generation VI (2009–2025) / Hyundai Equus 2009-2025 Owners Manual / Maintenance / Light bulbs / Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior light housing notches and snap the lens
into place.
5. If the map lamp and room lamp are not operating, have the vehicle checked by
an authorized EQUUS dealer.
CAUTION
Use care not to dirty or damage lens, lens tab, and plastic housings.
✽ NOTICE
If the luggage lamp does not operate, have the vehicle checked by an authorized EQUUS dealer.
License plate lamp replacement
1.Open the trunk.
2.Disconnect the negative battery cable.
3.Using a screwdriver, remove the trunk lid latch cover(1).
4.Using a screwdriver, remove the trunk lid switch(2), and disconnect ...
Appearance care
...
See also:
Rear Variable Damper Repair procedures
Removal
1.
Remove the rear wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the rear shock absorber (A) from the rear axle by loo ...
Fuel Pressure Control Valve Description and Operation
Description
Fuel Pressure Control Valve is installed on the high pressure
fuel pump and controls fuel flow flowing into the injectors in
accordance with the ECM signal calculated based on vario ...
Head Up Display Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower panel and then push the head u ...
Categories
Hyundai Equus Manuals
