>

Hyundai Equus: Camshaft Position Sensor (CMPS) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Camshaft Position Sensor (CMPS) Specifications

Specification
Item
Specification
Output Voltage (V)
High : 5.0V
Low : 0.7V
Air Gap (mm)
0.2 ~ 2.0

    Camshaft Position Sensor (CMPS) Description and Operation
    Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the pisto ...

    Camshaft Position Sensor (CMPS) Troubleshooting
    Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. ...

    See also:

    Front Door Inside Handle Repair procedures
    Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Disconnect the front door inside handle lamp connector (A). 3. After loosening the mounting screws ...

    Thermostat Troubleshooting
    Troubleshooting SymptomsPossible CausesRemedyCoolant leakage • From the thermostat gasket Check the mounting bolts • Check the torque of the mounting bolts • Retighten the bolts an ...

    Solenoid Valve Description and Operation
    Description Four air spring solenoid valves (‘-’ control) and one ambient solenoid valve are embedded inside this solenoid valve block as shown in the circuit diagram below. When connecting the ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com