>
Hyundai Equus Manuals

Hyundai Equus: Head Lamps Description and Operation - Lighting System - Body Electrical System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Head Lamps Description and Operation

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Lighting System / Head Lamps Description and Operation

HID Head Lamp
1.
Bulb
(1)
Elements
Xenon gas: Xenon gas activates the initial reaction for rapid illuminating.
Molybdenum electrode: anode arcing
Metal halide salts: color composing component
(2)
Lightening principle
When Xenon gas and metal halide salt will discharge the molybdenum anode in a capsule, it emits light.
2.
Ignitor
Ignitor (A) is an electromagnetic transformer that receives current from ballast and boost voltage to light on the arc light source in any environment.

3.
Ballast
(1)
Ballast (A) delivers an instant high voltage pulse to the ignitor electrode, to initialize discharge in the source.
(2)
Ballast supplies the stable power to the bulb and the ignitor during initialization and normal state of arc.

4.
Stability
(1)
Durable for vibration as there is no filament.
(2)
Does not operate if polarity are changed.
(3)
Doesn't operate if the input voltage is not in the range of 10-16V.
(4)
Doesn't operate if the circuit is short.
(5)
Doesn't operate if the bulb burnt out.
    Head Lamps Components and Components Location
    Components 1. Head lamp assembly lens & housing2. Ballast3. Head lamp (Low) bulb (HID) & Ignitor4. Bracket5. Dust cover (Low)6. Vertical adjustment (High/Low)7. Head lamp (High) bulb8. Du ...

    Head Lamps Repair procedures
    Inspection Head Lamp Relay Inspection 1. Pull out the head lamp relay (Low) (A) from the engine compartment relay box. A : Head lamp(Low) relay 2. Check for continuity between terminals. The ...

    See also:

    Rail Pressure Sensor (RPS) Specifications
    Specification ...

    Repair procedures
    Component Replacement after Deployment     Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related ...

    Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com